Certified Product List - Residential

2024 WERS Certified Products Directory - AFRC

NOTES
1.These results are not for public reference can only be used by financial WERS members only.
2.The use of these results requires manufacture validation through the AWA Accreditation Scheme.
3.Uw is the whole window U-value
4.SHGCw is the whole window solar heat gain coefficient
5.Tvw is the whole window visible (light) transmittance
6.Percentage improvement figures are compared with using base-case Generic Window 1 (3mm clear in standard aluminium frame)
7.A negative percentage improvement figure indicates performance worse than the base-case window
8.A positive percentage improvement figure indicates performance better than the base-case window
9.Maximum air infiltration is 5.0L/s.m2 at a positive pressure difference of 75 Pa as measured according to AS 2047
10.Static performance (Uw SHGCw Tvw Tdw) calculated using Window 7.4 and Therm 7.4 software (LBNL), 1999-2016
11.Annual energy performance (stars and % improvements) calculated using Nationwide House Energy Rating Software (AccuRate) according to procedures of WERS 2008.
12.Results disclosed at Australian Fenestration Rating Council (AFRC) regulations.
13. Products performance is based on products excluding reveals unless “with In-Line Reveal” is included in the product description.
14. Results marked as “with In-Line Reveal” can only be (claimed/used/certified/used for marketing and compliance) when designed, tested, sold, installed and warranted with the reveal in situ. Products that do not include the reveal must revert to the performance excluding the in-line reveal. Please contact the window manufacturer or WERS for further details.
15. Products with description such as "Embedded Frame" or "Embedded Sill" are modelled as per the embedment technique that is labelled in the frame description. Results (claimed/used/certified/used for marketing and compliance) must be of the same embedment technique as description and cannot be used in lieu of any other frame within same product suite. Please contact window manufacturer or WERS for further details.

Magicseal (Aust) Pty Ltd

Generate CSV
Window ID Frame Glazing Cooling Stars Heating Stars Cool% Heat% Uw SHGCw Tvw Air Inf
MAGI-001-01 MagicSeal Secondary Glazing on Standard Industry Typical Aluminium Window - 15mm Offset 3Clr/15/3PG 27% 51% 3.7 0.71 0.77 5
MAGI-001-02 MagicSeal Secondary Glazing on Standard Industry Typical Aluminium Window - 15mm Offset 3EG/15/3PG 47% 41% 3.7 0.48 0.66 5
MAGI-002-01 MagicSeal Secondary Glazing on Standard Industry Typical Aluminium Window - 60mm Offset 3Clr/60/3PG 29% 58% 3.1 0.72 0.79 5
MAGI-002-02 MagicSeal Secondary Glazing on Standard Industry Typical Aluminium Window - 60mm Offset 3EG/60/3PG 50% 47% 3.1 0.48 0.67 5
MAGI-002-03 MagicSeal Secondary Glazing on Standard Industry Typical Aluminium Window - 60mm Offset 3SpGy/60/3PG 63% 37% 3.1 0.30 0.22 5
MAGI-003-01 MagicSeal Secondary Glazing on Standard Industry Typical Aluminium Window - 8mm Offset 3Clr/8/3PG 24% 39% 4.7 0.69 0.75 5
MAGI-003-02 MagicSeal Secondary Glazing on Standard Industry Typical Aluminium Window - 8mm Offset 3EG/8/3PG 43% 28% 4.7 0.47 0.64 5
MAGI-003-03 MagicSeal Secondary Glazing on Standard Industry Typical Aluminium Window - 8mm Offset 3SpGy/8/3PG 55% 19% 4.7 0.30 0.21 5
MAGI-003-04 MagicSeal Secondary Glazing on Standard Industry Typical Aluminium Window - 8mm Offset 6.38CP/8/3PG 36% 43% 4.0 0.60 0.69 5
MAGI-007-01 MagicSeal Secondary Glazing on Standard Industry Typical Timber Window - 10mm Offset 3Clr/10/3PG 39% 55% 3.0 0.62 0.67 5
MAGI-007-02 MagicSeal Secondary Glazing on Standard Industry Typical Timber Window - 10mm Offset 3EG/10/3PG 55% 45% 3.0 0.42 0.57 5
MAGI-007-03 MagicSeal Secondary Glazing on Standard Industry Typical Timber Window - 10mm Offset 3SpGy/10/3PG 65% 37% 3.0 0.27 0.19 5
MAGI-009-01 MagicSeal Secondary Glazing on Standard Industry Typical Timber Window - 15mm Offset 3Clr/15/3PG 35% 61% 2.7 0.68 0.74 5
MAGI-009-02 MagicSeal Secondary Glazing on Standard Industry Typical Timber Window - 15mm Offset 3EG/15/3PG 54% 51% 2.7 0.46 0.63 5
MAGI-009-03 MagicSeal Secondary Glazing on Standard Industry Typical Timber Window - 15mm Offset 3SpGy/15/3PG 65% 41% 2.7 0.29 0.21 5
MAGI-011-01 MagicSeal Secondary Glazing on Standard Industry Typical Timber Window - 60mm Offset 3Clr/60/3PG 35% 62% 2.6 0.68 0.74 5
MAGI-011-02 MagicSeal Secondary Glazing on Standard Industry Typical Timber Window - 60mm Offset 3EG/60/3PG 54% 52% 2.6 0.46 0.63 5
MAGI-011-03 MagicSeal Secondary Glazing on Standard Industry Typical Timber Window - 60mm Offset 3SpGy/60/3PG 66% 42% 2.6 0.28 0.21 5
MAGI-001-04 MagicSeal Secondary Glazing on Standard Industry Typical Aluminium Window - 15mm Offset 3Clr/15/4.5PG 31% 51% 3.6 0.68 0.74 5
MAGI-001-05 MagicSeal Secondary Glazing on Standard Industry Typical Aluminium Window - 15mm Offset 3Clr/15/6PG 31% 52% 3.5 0.68 0.74 5
MAGI-002-04 MagicSeal Secondary Glazing on Standard Industry Typical Aluminium Window - 60mm Offset 3Clr/60/6PG 34% 59% 2.9 0.68 0.74 5
MAGI-013-01 MagicSeal Secondary Glazing on Standard Industry Typical Aluminium Window - 10mm Offset 3Clr/10/4.5PG 30% 50% 3.7 0.68 0.74 5
MAGI-013-02 MagicSeal Secondary Glazing on Standard Industry Typical Aluminium Window - 10mm Offset 3Clr/10/6PG 30% 50% 3.7 0.68 0.74 5
MAGI-014-01 MagicSeal Secondary Glazing on Standard Industry Typical Aluminium Window - 20mm Offset 3Clr/20/4.5PG 31% 52% 3.5 0.68 0.74 5
MAGI-014-02 MagicSeal Secondary Glazing on Standard Industry Typical Aluminium Window - 20mm Offset 3Clr/20/6PG 31% 52% 3.5 0.68 0.74 5
MAGI-015-01 MagicSeal Secondary Glazing on Standard Industry Typical Aluminium Window - 30mm Offset 3Clr/30/4.5PG 31% 53% 3.5 0.68 0.74 5
MAGI-015-02 MagicSeal Secondary Glazing on Standard Industry Typical Aluminium Window - 30mm Offset 3Clr/30/6PG 32% 53% 3.4 0.68 0.74 5
MAGI-016-01 MagicSeal Secondary Glazing on Standard Industry Typical Aluminium Window - 40mm Offset 3Clr/40/4.5PG 33% 56% 3.1 0.68 0.74 5
MAGI-016-02 MagicSeal Secondary Glazing on Standard Industry Typical Aluminium Window - 40mm Offset 3Clr/40/6PG 33% 56% 3.1 0.68 0.74 5
MAGI-011-04 MagicSeal Secondary Glazing on Standard Industry Typical Timber Window - 15mm Offset 3Clr/60/4.5Plexi 42% 60% 2.6 0.61 0.66 5
MAGI-020-01 MagicSeal Secondary Glazing on Standard Industry Typical Timber Window - 50mm Offset 3Clr/50/4.5Plexi 42% 59% 2.6 0.61 0.66 5
MAGI-019-01 MagicSeal Secondary Glazing on Standard Industry Typical Timber Window - 40mm Offset 3Clr/40/4.5Plexi 42% 59% 2.6 0.61 0.66 5
MAGI-018-01 MagicSeal Secondary Glazing on Standard Industry Typical Timber Window - 30mm Offset 3Clr/30/4.5Plexi 42% 59% 2.6 0.61 0.66 5
MAGI-017-01 MagicSeal Secondary Glazing on Standard Industry Typical Timber Window - 20mm Offset 3Clr/20/4.5Plexi 42% 59% 2.6 0.61 0.66 5
MAGI-009-04 MagicSeal Secondary Glazing on Standard Industry Typical Timber Window - 15mm Offset 3Clr/15/4.5Plexi 42% 59% 2.6 0.61 0.66 5
MAGI-007-04 MagicSeal Secondary Glazing on Standard Industry Typical Timber Window - 10mm Offset 3Clr/10/4.5Plexi 41% 58% 2.8 0.61 0.66 5
MAGI-011-05 MagicSeal Secondary Glazing on Standard Industry Typical Timber Window - 15mm Offset 3Clr/60/6Plexi 43% 60% 2.5 0.61 0.66 5
MAGI-020-02 MagicSeal Secondary Glazing on Standard Industry Typical Timber Window - 50mm Offset 3Clr/50/6Plexi 43% 60% 2.5 0.61 0.66 5
MAGI-019-02 MagicSeal Secondary Glazing on Standard Industry Typical Timber Window - 40mm Offset 3Clr/40/6Plexi 43% 60% 2.5 0.61 0.66 5
MAGI-018-02 MagicSeal Secondary Glazing on Standard Industry Typical Timber Window - 30mm Offset 3Clr/30/6Plexi 43% 60% 2.5 0.61 0.66 5
MAGI-017-02 MagicSeal Secondary Glazing on Standard Industry Typical Timber Window - 20mm Offset 3Clr/20/6Plexi 43% 60% 2.5 0.61 0.66 5
MAGI-009-16 MagicSeal Secondary Glazing on Standard Industry Typical Timber Window - 15mm Offset 3Clr/15/6Plexi 43% 59% 2.6 0.61 0.66 5
MAGI-007-05 MagicSeal Secondary Glazing on Standard Industry Typical Timber Window - 10mm Offset 3Clr/10/6Plexi 42% 58% 2.7 0.61 0.66 5